After building your bench that will hold the train and sketching out your trail plans that will make the best use of the space you have available, it's time to start securing the trail to your layout. First, lay the track in the layout you have designed to ensure that it will fit. Take a train around on the few test runs to make certain the most sold mounted ironing board layout flows well. Feel free to make changes to your plan at this point - often, once you actually see your teach in motion, you will find things that can make the whole picture flow better as you actually commence to be able to easily envision how all of your scenery will be arriving together in the around future.
When you are satisfied, it is time to lay down the roadbed. This is sold as cork or foam and can provide yet another way to reduce train noise as well as raise the paths from the board to offer your track a more realistic look. Place the roadbed under the paths and mark where their exact positions. Then you can remove the paths and glue the roadbed to your bench. Right after you've put a size of roadbed down, replace the tracks to ensure you are gluing the roadbed into the correct room.
Once the roadbed is in place, it's time and energy to secure the track. Lay down the whole track to ensure everything is in the proper place and test that all the rails are flush at their joints by running a finger over the complete track layout. Some builders suggest soldering the track joints to provide a more reliable track performance and power current, but deciding to do this will be based upon the permanence of your model and your specialized proficiency in the soldering trade.
Modelers also argument the best way to secure the track, with some suggesting glue while some go with small toenails or tacks put through the small holes in the cross ties. Both method will work, but it mainly is determined by your preferred choice. Remember that working with glue can be a messy adventure, and also to clean up any splatters promptly and often. Plus any glue left on the top of rails can cause electrical current problems or derailments in the foreseeable future.
And now we're finally to the portion of track mounting that lets your creative style shine. Most builders paint the rails of these tracks brown to give them a more realistic appearance, and some even go with a dark gray to spruce up their railroad jewelry. Be sure when painting rails to wipe off any excess paint on the tops of the rails. As with stuff, this will cause conductivity problems when you get started running your trains.
In addition to the last step is what really brings your model to life: adding the track ballast. Model railroad ballast comes in a variety of styles and colors, allowing you to choose the material that best fits your railroad and scenery. Sprinkle the electrical ballast over your track, allowing it to fall in a natural form that mimics real rail ballast, being careful to obtain it between the rails and ties, not on them.
Voila! Your current track is almost distorted from the pieces you pulled out of the box, and appears almost identical to the actual tracks that run from your town. There are other methods of laying track, such as Hand Laying, which requires modelers to lay down each cross tie and then add the rails themselves, being sure to keep the correct measure throughout the entirety of the track. But following the above steps will give you a practical look for your track that will match the landscapes you'll certainly be preparing.
